Acarsdeco2 [95% Certified]

acarsdeco2 --device 0 --freq-list 131.550e6 --json --http-port 8080 Then point a browser to http://localhost:8080/data for live JSON. A typical decoded message looks like this:

acarsdeco2 ... --http-port 8080 & curl -X POST --data-binary @- http://acarshub.local:8080/acars < acars.json Create /etc/systemd/system/acarsdeco2.service to auto-start on boot. Troubleshooting | Problem | Likely Fix | |---------|-------------| | No messages | Check antenna placement. Try 131.550 MHz first (busiest channel). | | High error rate | Reduce gain: --gain 30 . Ensure no FM broadcast overload. | | Device not found | Run rtl_test -t . Add user to plugdev group. | | Only one channel active | Verify --freq-list format. Use comma separation, no spaces. | Final Thoughts acarsdeco2 is an excellent choice for anyone wanting to explore VHF ACARS without managing multiple decoder instances. It’s stable, efficient, and works perfectly on a Raspberry Pi 3 or 4. While it doesn’t support VDL2 (use dumpvdl2 for that), it remains the go‑to tool for legacy ACARS decoding. acarsdeco2

This article explains what acarsdeco2 is, how it differs from other decoders, and how to set it up to turn your $20 RTL-SDR dongle into a real-time aircraft messaging receiver. acarsdeco2 is a lightweight, multi-channel ACARS decoder written in C. It is specifically designed to work with RTL-SDR devices (using the rtl-sdr library) and can decode multiple ACARS frequencies simultaneously within the bandwidth of your SDR. acarsdeco2 --device 0 --freq-list 131

[2025-03-15 14:23:10] 131.550MHz: ACARS mode: 2 Reg: B-1234 Flight: CA1234 Message: .CA1234 001A YYZ ZBAA OOOI OUT 1423 You can also log raw text to a file: Ensure no FM broadcast overload

acarsdeco2 --device 0 --freq-list 131.125e6,131.475e6,131.550e6,131.725e6,131.850e6 To feed decoded messages into a web dashboard or logging system:

acarsdeco2 --device 0 --freq-list 131.550e6 --output-file acars.log | Feature | acarsdeco2 | acarsdec | dumpvdl2 | |---------|------------|----------|----------| | Target | VHF ACARS | VHF ACARS | VDL Mode 2 (VHF) | | Multi-channel | Yes (up to 8) | No (run multiple instances) | Yes | | RTL-SDR | Native | Native | Native | | JSON output | Yes | Yes (with patch) | Yes | | Bit error correction | Good | Basic | Excellent | | VDL2 support | No | No | Yes | Note: dumpvdl2 decodes the newer VDL Mode 2 protocol (used alongside ACARS), while acarsdeco2 focuses on legacy ACARS. Advanced Tips 1. Reduce CPU usage acarsdeco2 --device 0 --freq-list ... --sample-rate 1.2e6 --corr-threshold 100 2. Forward to an aggregator Many users send data to ACARS Hub or ADS-B Exchange :