import struct mem = bytearray(open('bytecode.bin', 'rb').read()) reg = [0]*8 stack = [] pc = 0
00000000: 01 01 00 00 00 40 mov reg1, 0x40000000 00000006: 10 01 push reg1 ... At offset 0x80 inside the bytecode, there’s a sequence: f1vm 32 bit
Here’s a detailed write-up for a (likely a custom or fictional VM challenge, similar to a reverse engineering or CTF problem). Write-Up: F1VM (32-bit) – Breaking the Fastest Virtual Machine 1. Introduction F1VM is a custom 32-bit virtual machine interpreter challenge. It implements a simple bytecode-based VM with 8 general-purpose registers, a stack, and a limited instruction set. The goal is to analyze the VM’s operation, understand the bytecode format, and retrieve a hidden flag. import struct mem = bytearray(open('bytecode
while (1) opcode = memory[pc++]; switch(opcode) case 0x01: // MOV reg, imm case 0x02: // ADD case 0x03: // XOR ... Introduction F1VM is a custom 32-bit virtual machine
| Opcode | Mnemonic | Operands | |--------|--------------|-------------------------| | 0x01 | MOV reg, imm | reg (1 byte), imm (4 bytes) | | 0x02 | ADD reg, reg | src, dst | | 0x03 | XOR reg, reg | | | 0x10 | PUSH reg | | | 0x11 | POP reg | | | 0x20 | JMP addr | 4-byte address | | 0x21 | JZ addr | jump if reg0 == 0 | | 0xFF | HALT | |