Mikrotik L2tp Server Setup ⇒ 【ORIGINAL】

/ip firewall nat add chain=srcnat src-address=192.168.99.0/24 action=masquerade RouterOS automatically creates dynamic IPsec peers when use-ipsec=yes is set on L2TP. However, you can fine-tune:

/ip pool add name=vpn-pool ranges=192.168.99.2-192.168.99.254 IP → Pool → + → Name: vpn-pool , Addresses: 192.168.99.2-192.168.99.254 Step 2: Create L2TP Server Profile CLI: mikrotik l2tp server setup

/ip pool add name=vpn-pool ranges=192.168.99.2-192.168.99.254 /ppp profile add name=vpn-profile local-address=192.168.99.1 remote-address=vpn-pool dns-server=8.8.8.8,1.1.1.1 use-encryption=required /interface l2tp-server server set enabled=yes use-ipsec=yes ipsec-secret=YourStrongSharedSecret default-profile=vpn-profile /ppp secret add name=user1 password=MyPassword123 service=l2tp profile=vpn-profile /ip firewall filter add chain=input protocol=udp dst-port=500,4500 action=accept comment="IPsec" /ip firewall filter add chain=input protocol=ipsec-esp action=accept comment="ESP" /ip firewall filter add chain=input protocol=udp dst-port=1701 action=accept comment="L2TP" /ip firewall filter add chain=forward src-address=192.168.99.0/24 action=accept comment="VPN forward" /ip firewall nat add chain=srcnat src-address=192.168.99.0/24 action=masquerade comment="VPN internet" /ip firewall nat add chain=srcnat src-address=192