| Software | Version | Works with WinUSB | Works with OEM Driver | |----------|---------|-------------------|------------------------| | OpenHantek (open-source) | 0.3.1+ | Yes | Yes | | Hantek original software | 1.1.14 | No | Yes | | sigrok / PulseView | 0.4.2+ | Yes (via libusb) | No | | USBScope (third-party) | 1.2 | Yes | No |
[Strings] ManufacturerName = "Test Equipment Vendor" DeviceName = "USB Oscilloscope / Logic Analyzer (VID_1F3A)" | Component | Detail | |-----------|--------| | OS | Windows 7 Ultimate SP1 32-bit | | CPU | Intel Core 2 Duo E7500 | | RAM | 3 GB (DDR2) | | USB Host Controller | Intel ICH9 (EHCI) | | Device | Hantek 6022BE (VID_1F3A/PID_EFE8) | | Driver used | WinUSB via Zadig 2.8 | | Software | OpenHantek 0.3.1 | | Result | Working at 24 MSa/s, 2 channels | End of Report usb device-vid-1f3a-pid-efe8- windows 7 32 bit
For further assistance, consult the sigrok wiki or OpenHantek GitHub issues section. This report is based on reverse-engineered USB ID databases and community testing; actual device behavior may vary slightly by OEM variant. | Software | Version | Works with WinUSB